Tanner Systems ‹ the De-icer People
Tanner Systems Home

Tanners Answers to...
Frequently Asked Questions

CUSTOM DE-ICING SOLUTIONS
From Tanner® Systems
Need a tank that handles operating pressures greater than 200 PSIG (14 kg/cm2)? Just call Tanner! We custom-build systems to handle virtually any pressure requirement and any size air line. Call or write for a free quotation.

WHAT TANNER SYSTEMS DO:
PREVENT CONDENSED WATER VAPOR IN COMPRESSED AIR LINES FROM FREEZING:

• Down to minus 72 °F. ambient temperatures at full line pressure

• Low dew-points not dependant on upon reduced air line pressures

• De-icing is continuosly effective — does not degrade over a period of time — a unique bonding agent additive adheres to moisture

• Effectively prevents freezing whether or not an after-cooler is being used and if oil carryover from compressor is experienced

• De-icant feed is automatically proportioned to air use (Except in Frosto Vaporizer and TriFluid Injector)

• De-icant feed is approximately 200 to 300 PPM basis weight or volume — nominal rate is one drop per 20 cu.ft. of air used

• Operating cost for de-icers is most often pennies per hour

 

 

How the Tanner Systems Work
Tanner Systems Dispensers
Tanner Systems De-Icers
Tanner Systems Frequently Asked Questions
Contact tanner Systems - The De-icer People
Marketing Support
Material Safety Data Sheets

 

 

 

 

 

 

 

 

 

 

 

 

 

 

New Tri-Fluid Injector